Booking Maid Easy Methods Of Mold Removal

Methods Of Mold Removal

Getting Rid of Mold

Mold removal can be a complicated process. It’s going to take a bit more than just bleach and elbow grease to safely rid your home of any and all mold growth. Household mold isn’t just relegated to a single room inside the home. It can grow within your walls, the attic, under carpets, and inside the ductwork.


Not only is it tough to remove the mold, but finding it can often time be just as difficult. Mold can grow in hard to reach places, deep inside porous materials, and cause severe health issues in individuals with asthma or preexisting allergy symptoms.

Mold Exposure

The Center for Disease Control (CDC) and Environmental Protections Agency (EPA) have both well documented the health risks of mold exposure. The symptoms produce a rather large list of complications to include:

  • Sneezing;
  • a runny nose;
  • Wheezing and coughing fits;
  • red, itchy eye irritation;
  • a headache and sore throat;
  • difficulty breathing and shortness of breath.


Mold removal is a serious matter. As shown above, mold exposure carries very real consequences and the methods used should be approached in a professional manner.

Mold Removal Methods

There are couple different methods to choose from in order to remove mold from your home. You can approach it through the use of DIY tactics or from that of certified mold removal professionals.

DIY Method

DIY mold removal is only a good idea if the covered area is small, has gathered on an easy to clean surface, appears on easily replaceable materials, and you don’t suffer health problems related to mold exposure.


Firstly, you’ll need to acquire some protection from mold exposure. This includes long sleeves, long pants, and a HEPA-filtered face mask. Second, we’ve provided a short list of home remedy options to rid yourself of that unsightly mold.


Hydrogen Peroxide

The use of hydrogen peroxide can be your best friend when it comes to mold removal. It is an anti-fungal, anti-viral bacterial solution capable of killing off mold on a variety of surfaces.


HOW TO: Mix 3% concentration hydrogen peroxide into a spray bottle and saturate the moldy surface in its entirety. Allow it to sit for approximately 10 minutes. Afterwards, scrub the area to remove all mold and mold stains left over. Wipe down the area to remove residual mold and mold spores.

White Distilled Vinegar

Vinegar is another natural acidic agent to call upon in your fight against mold. It is able to kill up to 82% of all mold species.


HOW TO: Pour white distilled vinegar into a spray bottle and cover the moldy surface. Allow it to sit for approximately an hour. Afterwards, wipe down the entire area with a damp towel and allow to dry.

Baking Soda Solution

For a pet and child safe to kill the mold in your home, then you’ll want to use baking soda. Not only does it kill off the mold but will also absorb and residual moisture to help keep mold at bay.


HOW TO: Add ¼ tbsp. of baking soda to a water-filled spray bottle. Shake until dissolved. Spray the moldy area with the solution and scrub the mold from the surface using a sponge or scrub brush. Rinse the surface to remove any residual mold and re-apply a layer of the solution. Allow surface to dry.

When to Call a Professional

If the mold problem you’re dealing with happens to cover a large area greater than a 3×3 square grid, then it’s time to call in the experts. Mold developed following a flood may be contaminated with sewage or other potentially hazardous substances and should only be handled by a professional mold remediation team.


Mold also has a way of making it into your heating, ventilation, and air conditioning system. This is a tall order for anyone without the proper training or equipment to handle.


Other times you just might not have the time or energy to devote to a mold removal project. Perhaps you simply aren’t sure how to get things done correctly. Regardless of the reason, mold removal should be performed by a professional cleaning service or remediation team and will often time be the better option.


Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>